REMOVAL
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE ROOF DRIP SIDE FINISH MOULDING LH |
Put protective tape around the roof drip side finish moulding.

Text in Illustration *A
for Single Cab
*B
for Double Cab
*C
for Extra Cab
*1
Protective Tape
Detach the 2 clips and remove the roof drip side finish moulding.
