2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT THERMOSTAT

P013560E03

HINT:
The valve opening temperature is inscribed on the thermostat.

  1. P000436E03
    Immerse the thermostat in the water and then gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)

    If the valve opening temperature is not as specified, replace the thermostat.

  1. A085445E03
    Check the valve lift.

    Standard valve lift:
    8.5 mm (0.335 in.) or more at 95°C (203°F)

    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat temperature is below 77°C (171°F).
    If not fully closed, replace the thermostat.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →