REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the cylinder block drain cock plug and radiator drain cock plug, and then drain the coolant.
- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.


| 3. DISCONNECT RADIATOR HOSE OUTLET |
Disconnect the hose from the water inlet.
| 4. REMOVE WATER INLET |
![]() ![]() |
Remove the power steering pump's connector.
Remove the 2 nuts, bolt and inlet.

| 5. REMOVE THERMOSTAT |

