2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 from Aug 2012

HINT:
If the thermostat was not installed, cooling efficiency would be harmed. Even if the engine tends to overheat, do not remove the thermostat.


1. REMOVE NO. 1 ENGINE UNDER COVER
  1. Remove the 4 bolts and under cover.


2. DRAIN ENGINE COOLANT
  1. Remove the radiator cap.

  1. Loosen the 2 cylinder block drain cock plugs and radiator drain plug, and then the coolant.

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.


    A110401E01


3. REMOVE V-BANK COVER

  1. A112983
    Remove the 2 nuts and the V-bank cover.


4. DISCONNECT RADIATOR HOSE OUTLET

5. REMOVE WATER INLET HOUSING WITH THERMOSTAT

  1. A112082
    Remove the 3 nuts, water inlet with thermostat and gasket.

← COMPONENTS (from Jun 2011)REMOVAL (from Aug 2012) →