DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Thoroughly clean all parts to be assembled.
- Before installing the parts, apply fresh engine oil to all sliding and rotating surfaces.
- Replace all gaskets and oil seals with new ones.
- Thoroughly clean all parts to be assembled.
| 1. REMOVE VALVE LIFTER |
Remove the valve lifter.
- HINT:
- Arrange the valve lifters in the correct order.
| 2. REMOVE INTAKE VALVE |
![]() ![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
- SST
- 09202-70020
(09202-00020)
Remove the spring retainer, compression spring, valve and spring seat.
- HINT:
- Arrange the valves, compression springs, spring seats and spring retainers in the correct order.
| 3. REMOVE EXHAUST VALVE |
![]() ![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
- SST
- 09202-70020
(09202-00020)
Remove the spring retainer, compression spring, valve and spring seat.
- HINT:
- Arrange the valves, compression springs, spring seats and spring retainers in the correct order.
| 4. REMOVE SEMICIRCULAR PLUG |



