2014 Hilux · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011

HINT:
  1. Thoroughly clean all parts to be assembled.
  2. Before installing the parts, apply fresh engine oil to all sliding and rotating surfaces.
  3. Replace all gaskets and oil seals with new one.


1. REMOVE VALVE LIFTER
  1. Remove the valve lifter.

    HINT:
    Arrange the valve lifters in the correct order.


2. REMOVE INTAKE VALVE

A060282E01
  1. Using SST, compress the compression spring and remove the 2 valve spring retainer locks.

    SST
    09202-70020   (09202-00020)

  1. Remove the spring retainer, compression spring, valve and spring seat.

    HINT:
    Arrange the valves, compression springs, spring seats and spring retainers in the correct order.


3. REMOVE EXHAUST VALVE

A060276E01
  1. Using SST, compress the compression spring and remove the 2 valve spring retainer locks.

    SST
    09202-70020   (09202-00020)

  1. Remove the spring retainer, compression spring, valve and spring seat

    HINT:
    Arrange the valves, compression springs, spring seats and spring retainers in the correct order.


4. REMOVE SEMICIRCULAR PLUG
← REMOVAL (from Aug 2013)INSPECTION (from Jun 2011) →