2014 Hilux · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE INTAKE VALVE

  1. A060282E01
    Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
    SST
    09202-70020  
    09202-00020  

  1. Remove the spring retainer, compression spring, valve and spring seat.

    HINT:
    Arrange the valves, compression springs, spring seats and spring retainers in the correct order.


2. REMOVE EXHAUST VALVE

  1. A060276E01
    Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
    SST
    09202-70020  
    09202-00020  

  1. Remove the spring retainer, compression spring, valve and spring seat.

    HINT:
    Arrange the valves, compression springs, spring seats and spring retainers in the correct order.


3. REMOVE INTAKE VALVE STEM OIL SEAL

  1. A058955E01
    Using needle-nose pliers, remove the intake valve stem oil seal.


4. REMOVE EXHAUST VALVE STEM OIL SEAL
  1. Using needle-nose pliers, remove the exhaust valve stem oil seal.


5. REMOVE SEMICIRCULAR PLUG

6. REMOVE NO. 1 STRAIGHT SCREW PLUG

HINT:
If a No. 1 straight screw plug is corroded, replace it.

  1. Using a 6 mm hexagon wrench, remove the No. 1 straight screw plugs.


7. REMOVE STUD BOLT

HINT:
If a stud bolt is deformed or its threads are damaged, replace it.

  1. Remove the stud bolts.

← REMOVAL (from Aug 2013)INSPECTION (from Jun 2011) →