INSTALLATION
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. INSTALL HEADLIGHT ASSEMBLY LH |
Connect the connectors.
Install the headlight assembly LH with the bolt and 3 screws.
| 2. INSTALL FRONT BUMPER COVER |
w/ Fog Light:
Connect the 2 fog light connectors.
w/ Headlight Cleaner System:
Connect the No. 1 headlight cleaner hose.
Attach the 6 claws to install the front bumper cover.
Install the 5 clips, 2 bolts and 2 screws.
Install the 3 clips and 6 screws.
| 3. INSTALL RADIATOR GRILLE |
Attach the 6 claws to install the radiator grille.
Install the 2 screws and 2 clips.
| 4. ADJUST HEADLIGHT AIMING |
| 5. ADJUST FOG LIGHT AIMING |
