2014 Hilux · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jun 2011

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL HEADLIGHT BRACKET LH
  1. Install the headlight bracket LH with the 1 or 2 screws.

    HINT:
    1. There are 1 or 2 screws depending on the date of manufacture.
    2. When replacing the headlight unit, 1 screw is not used as the hole on the inner side is covered.


2. INSTALL CLEARANCE LIGHT BULB
  1. Install the clearance light bulb to the clearance light socket.


3. INSTALL CLEARANCE LIGHT SOCKET

  1. E225344
    Turn the clearance light socket in the direction indicated by the arrow in the illustration to install it.


4. INSTALL FRONT TURN SIGNAL LIGHT BULB
  1. Install the front turn signal light bulb to the front turn signal light socket.


5. INSTALL FRONT TURN SIGNAL LIGHT SOCKET

  1. E225345
    Turn the front turn signal light socket in the direction indicated by the arrow in the illustration to install it.


6. INSTALL NO. 1 HEADLIGHT BULB

  1. E225346
    Install the No. 1 headlight bulb and set the lock of the set spring.


7. INSTALL HEADLIGHT SOCKET COVER
  1. Install the headlight socket cover.

← ADJUSTMENT (from Jun 2011)INSTALLATION (from Jun 2011) →