INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (w/ Automatic Light Control System, for LHD) |
Inspect the light control switch.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
11 (HU) - 12 (EL)
OFF
10 kΩ or higher
18 (T) - 12 (EL)
TAIL
Below 1 Ω
18 (T) - 12 (EL)
HEAD
Below 1 Ω
20 (H) - 12 (EL)
HEAD
Below 1 Ω
19 (A) - 12 (EL)
AUTO
Below 1 Ω
Inspect the headlight dimmer switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
17 (HF) -12 (EL)
FLASH
Below 1 Ω
11 (HU) - 12 (EL)
FLASH
Below 1 Ω
16 (HL) - 12 (EL)
LO BEAM
Below 1 Ω
11 (HU) - 12 (EL)
HI BEAM
Below 1 Ω
Inspect the turn signal switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
13 (TR) - 12 (EL)
Right turn
Below 1 Ω
13 (TR) - 12 (EL)
Neutral
10 kΩ or higher
15 (TL) - 12 (EL)
Neutral
10 kΩ or higher
15 (TL) - 12 (EL)
Left turn
Below 1 Ω
Inspect the fog light switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (LFG) - 4 (BFG)
OFF
10 kΩ or higher
3 (LFG) - 4 (BFG)
ON
Below 1 Ω
Text in Illustration *a
Component without harness connected
(Headlight Dimmer Switch Assembly)
| INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (w/ Automatic Light Control System, for RHD) |
Inspect the light control switch.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
20 (HU) - 19 (EL)
OFF
10 kΩ or higher
13 (T) - 19 (EL)
TAIL
Below 1 Ω
13 (T) - 19 (EL)
HEAD
Below 1 Ω
11 (H) - 19 (EL)
HEAD
Below 1 Ω
12 (A) - 19 (EL)
AUTO
Below 1 Ω
Inspect the headlight dimmer switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
14 (HF) -19 (EL)
FLASH
Below 1 Ω
20 (HU) - 19 (EL)
FLASH
Below 1 Ω
15 (HL) - 19 (EL)
LO BEAM
Below 1 Ω
20 (HU) - 19 (EL)
HI BEAM
Below 1 Ω
Inspect the turn signal switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
16 (TR) - 19 (EL)
Right turn
Below 1 Ω
16 (TR) - 19 (EL)
Neutral
10 kΩ or higher
18 (TL) - 19 (EL)
Neutral
10 kΩ or higher
18 (TL) - 19 (EL)
Left turn
Below 1 Ω
Inspect the fog light switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
8 (LFG) - 7 (BFG)
OFF
10 kΩ or higher
8 (LFG) - 7 (BFG)
ON
Below 1 Ω
Text in Illustration *a
Component without harness connected
(Headlight Dimmer Switch Assembly)
| INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LHD) |
Inspect the light control switch.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
9 (HU) - 11 (ED)
Light control switch off
10 kΩ or higher
8 (HL) - 11 (ED)
13 (B1) - 10 (T1)
Light control switch tail
Below 1 Ω
9 (HU) - 11 (ED)
Light control switch head
Below 1 Ω
8 (HL) - 11 (ED)
Inspect the headlight dimmer switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
9 (HU) - 11 (ED)
Headlight dimmer switch hi beam
Below 1 Ω
- HINT:
- Perform the flash and high beam inspection with the light control switch on head.
Inspect the turn signal switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
6 (TR) - 7 (E)
Turn signal switch right turn
Below 1 Ω
6 (TR) - 7 (E)
Turn signal switch right lane change
Below 1 Ω
6 (TR) - 7 (E)
Turn signal switch neutral
10 kΩ or higher
5 (TL) - 7 (E)
5 (TL) - 7 (E)
Turn signal switch left lane change
Below 1 Ω
5 (TL) - 7 (E)
Turn signal switch left turn
Below 1 Ω
Inspect the fog light switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 (BFG) - 4 (LFG)
Fog light switch off
10 kΩ or higher
3 (BFG) - 4 (LFG)
Front fog light switch on
Below 1 Ω
Text in Illustration *a
Component without harness connected
(Headlight Dimmer Switch Assembly)
| INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RHD) |
Inspect the light control switch.

Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
9 (HU) - 7 (ED)
Light control switch off
10 kΩ or higher
10 (HL) - 7 (ED)
5 (B1) - 8 (T1)
Light control switch tail
Below 1 Ω
9 (HU) - 7 (ED)
Light control switch head
Below 1 Ω
10 (HL) - 7 (ED)
Inspect the headlight dimmer switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
9 (HU) - 7 (ED)
Headlight dimmer switch hi beam
Below 1 Ω
- HINT:
- Perform the flash and high beam inspection with the light control switch on head.
Inspect the turn signal switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
13 (TR) - 11 (E)
Turn signal switch right turn
Below 1 Ω
13 (TR) - 11 (E)
Turn signal switch right lane change
Below 1 Ω
13 (TR) - 11 (E)
Turn signal switch neutral
10 kΩ or higher
12 (TL) - 11 (E)
12 (TL) - 11 (E)
Turn signal switch left lane change
Below 1 Ω
12 (TL) - 11 (E)
Turn signal switch left turn
Below 1 Ω
Inspect the fog light switch.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
2 (BFG) - 1 (LFG)
Fog light switch off
10 kΩ or higher
2 (BFG) - 1 (LFG)
Front fog light switch on
Below 1 Ω
Text in Illustration *a
Component without harness connected
(Headlight Dimmer Switch Assembly)
