2014 Hilux · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

B113570E01
  1. Install the switch to attach the 2 claws.


2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
  1. for Manual Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 4 claws to connect the air conditioner control.

    3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.


3. INSTALL FRE/REC CONTROL KNOB

E225819
  1. Install the No. 2 heater control knob as shown in the illustration.


4. INSTALL HEATER CONTROL KNOB

E225818
  1. Install the heater control knob as shown in the illustration.


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

← INSPECTION (from Jun 2011)INSTALLATION (Aug 2012 – Jul 2013) →