2014 Hilux · Service Manual BODY ELECTRICAL

The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

Circuit diagnosis · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013

INSPECTION PROCEDURE

HINT:
For vehicles equipped with an Extension Module, refer to optional equipment's manuals.


1. CHECK CELLULAR PHONE
  1. Check if the voice on the other side can be heard using the cellular phone.

    OK:
    The voice can be heard.



NG
CELLULAR PHONE IS FAULTY
OK


2. CHECK AUDIO AND VISUAL SYSTEM
  1. Check that audio sound can be heard from the driver side speaker.

    OK:
    Audio sound can be heard.

    HINT:
    If audio sound cannot be heard, proceed to "No sound can be heard from speakers (Audio is mute)" in Problem Symptoms Table (Click here).



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3. CHECK SETTINGS

  1. Check that the received voice level setting on the radio and display receiver assembly is not too low.

    1. Press the "SETUP" switch.

    2. E219363E01
      Touch the "Telephone" button and select the "Sound settings" to display the "Phone Sound Settings" screen.

    3. Check that the "Call Volume" level is not too low.

      OK:
      "Call Volume" level is not too low.

      Text in Illustration 
      *a
      Example

  1. Check that the received voice level setting on the cellular phone is not too low.

    OK:
    The received voice level setting is not too low.



NG
TURN VOLUME UP
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Cannot Call in a Certain Place (Aug 2012 – Jul 2013)The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted (Aug 2012 – Jul 2013) →