Use the same procedures described for the LH side.
5.
REMOVE LOWER BACK PANEL GARNISH
Detach the 6 claws, 2 guides and 5 clips and remove the lower back panel garnish.
6.
REMOVE REAR SEATBACK ASSEMBLY
Remove the 2 bolts.
Lift up the rear seatback assembly in the direction indicated by the arrow to detach the 2 hooks from the vehicle body. Then remove the rear seatback assembly.
NOTICE:
Be careful not to damage the vehicle body.
7.
REMOVE FRONT DOOR SCUFF PLATE LH
Put protective tape around the front door scuff plate.
Text in Illustration
*1
Protective Tape
Using a moulding remover, detach the 4 clips and 8 claws and remove the front door scuff plate.
8.
REMOVE FRONT DOOR WEATHERSTRIP LH
Remove the front door opening trim.
9.
REMOVE QUARTER INSIDE TRIM BOARD LH
Remove the bolt and disconnect the front seat outer belt floor anchor.
Detach the 4 claws, 3 guides and 7 clips and remove the quarter inside trim board.