ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (REAR LH AND REAR RH) |
![]() ![]() |
Measure the resistance of the switch when the switch is operated.
- Standard resistance:
Tester Connection
Switch Condition
Specified Condition
5 - 4
2 - 3
UP
Below 1 Ω
5 - 4
2 - 1
OFF
Below 1 Ω
5 - 3
2 - 1
DOWN
Below 1 Ω
- If the result is not as specified, replace the regulator switch assembly.


