2014 Hilux · Service Manual ENGINE

SYSTEM DIAGRAM

System information · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 from Aug 2012

  1. The manifold absolute pressure sensor detects the manifold pressure by using the built-in sensor unit. The ECM determines the basic injection duration and injection advance timing based on the output voltage by the manifold absolute pressure sensor.

  2. The manifold absolute pressure sensor monitors the absolute pressure inside the intake manifold (default is 0 kPa (0 mmHg, 0 in.Hg)), so that the ECM controls the air-fuel ratio at the proper level under any driving conditions, without influence of fluctuations in the atmospheric pressure due to factors such as high altitude, etc.

    A110315E01

    A110317E01
← PARTS LOCATION (from Aug 2012)SYSTEM DIAGRAM (from Aug 2012) →