2014 Hilux · Service Manual ENGINE

REPAIR

Removal / installation · Vehicles built from Jun 2011


1. BORE CYLINDER

HINT:
  1. Bore all 4 cylinders for the O/S piston outside diameter.
  2. Replace all the piston rings with ones to match the O/S pistons.

  1. Keep 4 new O/S pistons.

    Piston diameter:
    O/S 0.50
    O/S 0.75
    O/S 1.00
    96.42 to 96.70 mm (3.7960 to 3.8070 in.)
    96.67 to 96.95 mm (3.8058 to 3.8169 in.)
    96.92 to 97.20 mm (3.8157 to 3.8267 in.)

  1. A149761E01
    Using a micrometer, measure the piston diameter at right angles to the piston center line, the indicated distance from the piston head.

    Distance:
    65.00 to 65.06 mm (2.5591 to 2.5614 in.)

  1. Calculate how much each cylinder needs to be rebored:

    Size to be rebored:
    Size to be rebored = P + C - H
    P = Piston diameter
    C = Piston clearance: 0.070 to 0.090 mm (0.0028 to 0.0035 in.)
    H = Allowance for honing: 0.02 mm (0.0008 in.) or less

  1. Bore and hone the cylinders to calculated dimensions.

    Maximum honing:
    0.02 mm (0.0008 in.)

    NOTICE:
    Excess honing will destroy the finished roundness.

← REASSEMBLY (from Jun 2011)PRECAUTION (from Jun 2011) →