REPAIR
Removal / installation · Vehicles built from Jun 2011
| 1. BORE CYLINDER |
- HINT:
- Bore all 4 cylinders for the O/S piston outside diameter.
- Replace all the piston rings with ones to match the O/S pistons.
- Bore all 4 cylinders for the O/S piston outside diameter.
Prepare 4 new O/S pistons.
- Standard piston diameter:
- 92.42 to 92.45 mm (3.6386 to 3.6398 in.)
Using a micrometer, measure the piston diameter according to the following conditions: 1) measure at a right angle to the piston center line, and 2) measure at the indicated distance from the piston head.

- Distance:
- 63.5 mm (2.50 in.)
Text in Illustration *1
Size Mark
*2
Piston Pin Hole Inside Diameter Mark
*3
Front Mark (Arrow)
*4
Distance
Calculate how much each cylinder needs to be rebored:
- Size to be rebored:
- Size to be rebored = P + C - H
- P = Piston diameter
- C = Piston clearance: 0.07 to 0.09 mm (0.0028 to 0.0035 in.)
- H = Allowance for honing: 0.02 mm (0.0008 in.) or less
Bore and hone the cylinders to the calculated dimensions.
- Maximum honing:
- 0.02 mm (0.0008 in.)
- NOTICE:
- Excess honing will destroy the finished roundness.
