2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL VACUUM SWITCHING VALVE (for EGR CUT)

A112098
  1. Install the valve with the bolt.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }


2. INSTALL VACUUM SWITCHING VALVE BRACKET

  1. A110298
    Install the bracket with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the vacuum hoses to the 3 locations.

  1. Connect the 2 connectors.


3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

  1. A110362
    Install the cover with the 3 bolts and 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    CAUTION:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

← INSTALLATION (Jun 2011 – Jul 2012)INSTALLATION (from Aug 2013) →