2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011

NOTICE:
Do not remove the electric vacuum regulating valve.


INSPECT ELECTRIC VACUUM REGULATING VALVE (for EGR)

  1. A114163E01
    Measure the resistance of the E-VRV.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    11 to 13 Ω at 20°C (68°F)
    1 - Body Ground
    2 - Body Ground
    10 MΩ or higher

    If the result is not as specified, replace the electric vacuum regulating valve.

  1. A114164E01
    Check operation of the E-VRV.

    1. Check that air flows from port E to the filter.
      If the result is not as specified, replace the electric vacuum regulating valve.

    2. A114165E03
      Apply battery voltage across terminals 1 and 2.

    3. Check that air flows from port E to port F.
      If the result is not as specified, replace the electric vacuum regulating valve.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →