REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY |
Remove the 3 bolts, 2 nuts and cover.

| 3. REMOVE VACUUM SWITCHING VALVE BRACKET |
Disconnect the 2 connectors.

Disconnect the vacuum hoses from the 3 locations.
Remove the 2 bolts and bracket.
| 4. REMOVE VACUUM SWITCHING VALVE (for EGR CUT) |
![]() ![]() |
Remove the bolt and valve.

