INSPECTION
Inspection · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 from Aug 2012
- NOTICE:
- Do not remove the electric vacuum regulating valve.
| INSPECT ELECTRIC VACUUM REGULATING VALVE (for EGR) |
Measure the resistance of the E-VRV.

- Standard resistance:
Tester Connection
Specified Condition
1 - 2
11 to 13 Ω at 20°C (68°F)
1 - Body Ground
2 - Body Ground
10 MΩ or higher
Check operation of the E-VRV.

Check that air flows from port E to the filter.
If the result is not as specified, replace the electric vacuum regulating valve.
Apply battery voltage across terminals 1 and 2.

Check that air flows from port E to port F.
If the result is not as specified, replace the electric vacuum regulating valve.
