INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL HEATER SWITCH ASSEMBLY |
Attach the 2 claws to install the heater switch assembly.
Connect the connector.
| 2. INSTALL SWITCH BASE |
Connect the connectors.
Attach the 8 claws to install the switch base.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
Attach the 3 guides, 2 claws and 3 clips to install the lower instrument panel finish panel.
| 4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() ![]() |
Attach the 2 hinges to install the glove compartment door.
Text in Illustration *1
Hinge
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

Text in Illustration *1
Stopper

