INSTALLATION
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
INSTALL SPARK PLUG |
 |
Install the 6 spark plugs.
-
Torque:
- 20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
| 2.
INSTALL IGNITION COIL ASSEMBLY |
 |
- Install the ignition coil with the bolt.
-
Torque:
- 10 N*m{
102 kgf*cm
, 7 ft.*lbf
}
Connect the connector.
| 3.
INSTALL AIR CLEANER ASSEMBLY
|
 |
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
| 4.
INSTALL V-BANK COVER
|
 |
-
Torque:
- 7.5 N*m{
76 kgf*cm
, 66 in.*lbf
}
| 5.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 6.
PERFORM INITIALIZATION |
 |
Perform initialization (Click here).
- CAUTION:
- Certain systems need to be initialized after disconnecting the cable from the negative (-) battery terminal.