P0106 Manifold Absolute Pressure / Barometric Pressure Circuit Range / Performance Problem
Diagnostic trouble codes · Vehicles built Aug 2013 – Jul 2014
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
Refer to DTC P0105 (Click here).| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0106 |
Voltage output of the manifold absolute pressure sensor is out of the standard range (2 trip detection logic) |
Manifold absolute pressure sensor |
INSPECTION PROCEDURE
- HINT:
- If DTCs P0105, P0107, and P0108 are output simultaneously, the manifold absolute pressure sensor circuit may have an open or short. Perform troubleshooting for these DTCs first.
| 1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0106) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON and turn the tester ON.
Select the following menu items: Powertrain / Engine and ECT / DTC.
Read DTCs.
- Result:
Display (DTC Output)
Proceed to
P0106
A
P0106 and other DTCs
B
- HINT:
- If codes other than P0106 are output, perform troubleshooting for those DTCs first.
|
|
||||
| A | ||
| ||
