2014 Hilux · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE GENERATOR PULLEY CAP
  1. Using a screwdriver, remove the generator pulley cap from the generator pulley with clutch.


2. REMOVE GENERATOR PULLEY WITH CLUTCH

A203706E01
  1. Mount the generator in a vise between aluminum plates.

  1. Install SST (A) and (B) to the generator pulley as shown in the illustration.

    SST
    09820-63021  

  1. A203707E02
    Using a wrench to hold SST (A), turn SST (B) counterclockwise to loosen the generator pulley.

  1. Remove the generator pulley.


3. REMOVE GENERATOR REAR END COVER

  1. A122140
    Remove the 3 nuts and end cover.

  1. A196077
    Remove the terminal insulator.


4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY

  1. A196078
    Remove the 2 screws and brush holder.


5. REMOVE GENERATOR COIL ASSEMBLY

  1. A196079
    Remove the 4 bolts.

  1. A122144E01
    Using SST, remove the coil assembly.
    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04071, 09957-04010, 09958-04011)

  1. Remove the generator washer.


6. REMOVE GENERATOR ROTOR ASSEMBLY
← REMOVAL (from Aug 2013)INSPECTION (from Jun 2011) →