DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
REMOVE GENERATOR PULLEY CAP |
 |
Using a screwdriver, remove the generator pulley cap from the generator pulley with clutch.
| 2.
REMOVE GENERATOR PULLEY WITH CLUTCH |
 |
Mount the generator in a vise between aluminum plates.
- SST
- 09820-63021
Install SST (A) and (B) to the generator pulley as shown in the illustration.
- Using a wrench to hold SST (A), turn SST (B) counterclockwise to loosen the generator pulley.
Remove the generator pulley.
| 3.
REMOVE GENERATOR REAR END COVER |
 |
- Remove the 3 nuts and end cover.
- Remove the terminal insulator.
| 4.
REMOVE GENERATOR BRUSH HOLDER ASSEMBLY |
 |
- Remove the 2 screws and brush holder.
| 5.
REMOVE GENERATOR COIL ASSEMBLY |
 |
- Remove the 4 bolts.
- Using SST, remove the coil assembly.
- SST
- 09950-40011
(09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04071, 09957-04010, 09958-04011)
Remove the generator washer.
| 6.
REMOVE GENERATOR ROTOR ASSEMBLY |
|