2014 Hilux · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE STARTER YOKE ASSEMBLY

A199399
  1. Remove the nut and disconnect the lead wire from terminal C.

  1. Remove the 2 through bolts.

  1. Pull out the starter yoke together with the armature.

  1. Remove the O-ring from the starter yoke.


2. REMOVE STARTER CLUTCH SUB-ASSEMBLY

  1. A199400
    Remove the 2 screws and magnet starter switch assembly.

  1. A199401E01
    Remove the idler gear, clutch roller, retainer and starter clutch sub-assembly from the starter drive housing.

  1. Remove the return spring.

  1. A115020E02
    Using a magnet hand, remove the steel ball from the clutch shaft hole.


3. REMOVE STARTER BRUSH HOLDER ASSEMBLY

  1. A173938
    Remove the 2 screws and commutator end frame from the starter yoke.

  1. Remove the O-ring from the starter yoke.

  1. Disconnect the 4 starter yoke brushes from the starter brush holder.

    1. A050090
      Using a screwdriver, pull back the spring.

    2. Disconnect the brush from the starter brush holder.

  1. Remove the starter brush holder from the starter yoke.


4. REMOVE STARTER ARMATURE ASSEMBLY
  1. Remove the starter armature from the starter yoke.

← REMOVAL (from Aug 2013)INSPECTION (from Jun 2011) →