2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE FRONT FENDER SEAL
  1. Remove the 5 clips and seal.


3. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY (for Automatic Transmission)

C118024
  1. Remove the oil dipstick.

  1. Remove the 2 bolts and oil filler tube.

  1. Remove the O-ring from the oil filler tube.


4. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

G034217E01
  1. Remove the 2 bolts and disconnect the release cylinder assembly.


5. REMOVE STARTER ASSEMBLY
  1. Disconnect the starter connector.

  1. Remove the terminal cap.

  1. Remove the nut and disconnect the starter wire.

  1. Remove the 2 bolts and starter.

← REMOVAL (Aug 2012 – Jul 2013)DISASSEMBLY (from Jun 2011) →