INSTALLATION
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
INSTALL STOP LIGHT SWITCH ASSEMBLY |
 |
Text in Illustration
*1
|
Brake Pedal
|
*2
|
Adjuster
|
*3
|
Stop Light Switch Assembly
|
Install the adjuster to the support.
Insert the switch into the adjuster until it slightly touches the pedal.
- NOTICE:
- Do not depress the pedal.
| 2.
ADJUST STOP LIGHT SWITCH ASSEMBLY |
|
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 4.
PERFORM INITIALIZATION |
 |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.