REMOVAL
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE COOLER THERMISTOR (SOLAR SENSOR) |
![]() ![]() |
Put protective tape around the cooler thermistor (solar sensor).
Using a screwdriver, detach the 2 claws and remove the cooler thermistor (solar sensor).
- HINT:
- Tape the screwdriver tip before use.
Disconnect the connector.
Text in Illustration *1
Protective Tape
*2
Cooler Thermistor (Solar Sensor)


