INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY |
Install the air conditioning amplifier assembly.
Connect the No. 1 cooler wire to the air conditioning amplifier assembly as shown in the illustration.

Text in Illustration *1
Air Conditioning Amplifier Assembly
*2
No. 1 Cooler Wire
| 2. INSTALL HEATER CONTROL BASE |
Attach the 4 claws to install the heater control base.
| 3. CONNECT NO. 1 COOLER WIRE |
![]() ![]() |
Connect the No. 1 cooler wire as shown in the illustration.
| 4. INSTALL LOWER HEATER CONTROL BASE |
Attach the 3 claws to the lower heater control base.
Install the 4 screws.
Install the 4 screws.
| 5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
for Manual Air Conditioning System:
Connect the connectors.
Attach the 4 claws to connect the air conditioner control.
Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.
for Automatic Air Conditioning System:
Connect the connectors.
Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.

