2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT NO. 1 COOLER WIRE

  1. Measure the resistance according to the value(s) in the table below.

    B276029E02

    Text in Illustration 
    *a
    Terminal A
    *b
    Terminal B

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A1 - B1
    Always
    Below 1 Ω
    A2 - B2
    Always
    Below 1 Ω
    A3 - B3
    Always
    Below 1 Ω
    A4 - B4
    Always
    Below 1 Ω
    A5 - B5
    Always
    Below 1 Ω
    A6 - B6
    Always
    Below 1 Ω
    A7 - B7
    Always
    Below 1 Ω
    A8 - B8
    Always
    Below 1 Ω
    A9 - B9
    Always
    Below 1 Ω
    A10 - B10
    Always
    Below 1 Ω
    A11 - B11
    Always
    Below 1 Ω
    A12 - B12
    Always
    Below 1 Ω
    A13 - B13
    Always
    Below 1 Ω
    A14 - B14
    Always
    Below 1 Ω
    A15 - B15
    Always
    Below 1 Ω

    If the result is not as specified, replace the No. 1 cooler wire.

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →