2014 Hilux · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jun 2011


CHECK GLOW PLUG

NOTICE:
Turn the ignition switch off for 60 seconds before performing this inspection.

  1. A123810
    Measure the resistance between the glow plug terminal and ground.

    Standard resistance:
    Approx. 0.72 Ωat 20°C (68°F)

    NOTICE:
    1. Do not damage the glow plug pipes as it could cause an open circuit or shorten the life of the glow plugs.
    2. Avoid getting oil and gasoline on the glow plugs when cleaning them.
    3. During inspection, be sure to wipe any oil on the terminal and bakelite washer with a dry cloth.
    4. Do not apply more than 11 V to the glow plug as it could cause an open circuit.

← COMPONENTS (from Jun 2011)REMOVAL (from Jun 2011) →