2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE INTAKE PIPE ASSEMBLY

  1. A118426
    Loosen the 2 intake pipe clamps.

  1. Remove the 2 bolts and intake pipe.


3. REMOVE NO. 1 GLOW PLUG CONNECTOR
  1. Remove the nut and wire harness.

  1. Remove the 4 screw grommets, 4 nuts and glow plug connector.


4. REMOVE GLOW PLUG ASSEMBLY

  1. A118420
    Using a 12 mm deep socket wrench, remove the 4 glow plugs.

← ON-VEHICLE INSPECTION (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →