2014 Hilux · Service Manual ENGINE

REASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. INSTALL DELIVERY VALVE HOLDER

  1. S004413E01
    Install new gaskets and the valves into the distributive head.

  1. Install the springs into the delivery valve holders.

  1. Using SST, install the delivery holders.

    SST
    09260-54012   (09269-54020)

    Torque:
    59 N*m{ 602 kgf*cm , 43 ft.*lbf }


2. INSTALL DISTRIBUTIVE HEAD PLUG

  1. B013114E02
    Install a new O-ring to the distributive head plug.

  1. Using SST, install the head plug.

    SST
    09260-54012   (09262-54010)

    Torque:
    88 N*m{ 900 kgf*cm , 65 ft.*lbf }


3. INSTALL FUEL TEMPERATURE SENSOR

  1. B013326E01
    Install a new O-ring to the fuel temperature sensor.

  1. Using a 19 mm deep socket wrench, install the fuel temperature sensor.

    Torque:
    22 N*m{ 224 kgf*cm , 16 ft.*lbf }


4. INSTALL TIMING CONTROL VALVE

  1. B013327E01
    Using a 5 mm hexagon wrench, install the timing control valve with the 2 bolts.


5. INSTALL FUEL FILTER TO INJECTION PUMP FUEL PIPE

  1. A070790E01
    Install a new washer and the hollow screw.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }

  1. Install the fuel pipe with 2 new washers and the cap nut.

    Torque:
    27 N*m{ 271 kgf*cm , 20 ft.*lbf }


6. INSTALL NO. 4 NOZZLE LEAKAGE PIPE
  1. Install the nozzle leakage pipe with 2 new washers and the overflow screw.

    Torque:
    27 N*m{ 271 kgf*cm , 20 ft.*lbf }

← INSPECTION (from Jun 2011)INSTALLATION (from Jun 2011) →