In some cases, wireless control functions are normal but one or more of the following may occur:
The hazard warning light answer-back function is not normal (the theft warning ECU assembly's turn signal flasher assembly output may be malfunctioning).
The security horn answer-back function is not normal (the security horn assembly signal output may be malfunctioning)*.
HINT:
*: The security horn applies only if the wireless answer-back function has been customized so that the hazard warning lights flash and the security horn sounds.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
When replacing the theft warning ECU assembly, refer to the registration procedures (Click here).
1. CHECK WIRELESS DOOR LOCK CONTROL FUNCTION
Check the wireless door lock functions by operating the transmitter switches.
Result
Result
Proceed to
Only hazard warning light and side turn signal light answer-back does not occur
A
Only security horn answer-back does not occur
B
HINT:
The security horn applies only if the wireless answer-back function has been customized so the hazard warning lights flash and the security horn sounds.