2014 Hilux · Service Manual
SECURITIES
Home
›
SECURITIES
› ENGINE IMMOBILISER › UNLOCK WARNING SWITCH
INSPECTION
Inspection
·
Vehicles built from Jun 2011
INSPECT UNLOCK WARNING SWITCH ASSEMBLY
Measure the resistance of the switch.
Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Pushed
Below 1 Ω
Not pushed
10 kΩ or higher
If the result is not as specified, replace the switch assembly.
← Security Indicator Light Does not Blink (from Aug 2013)
COMPONENTS (from Jun 2011) →