2014 Hilux · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT HEADLIGHT LEVELING SWITCH

E190512E04
  1. Inspect the headlight leveling switch operation.

    1. Connect the positive (+) lead of the battery to terminal 1 (B) and the negative (-) lead to terminal 2 (E).

    2. Measure the voltage according to the value(s) in the table below.

      Standard voltage:
      Tester Connection
      Switch Condition
      Specified Condition
      (Battery voltage is 12 V)
      1(B) - 2(T)
      0
      10.4 to 11.2 V
      1
      8.52 to 9.24 V
      2
      6.60 to 7.32 V
      3
      4.68 to 5.4 V
      4
      2.76 to 3.48 V
      5
      0.84 to 1.56 V

OK:
Measurement Condition
Specified Condition
Battery positive (+) → 3(ILL+)
Battery negative (-) → 4(E)
LED Illuminates

If the result is not as specified, replace the headlight leveling switch.

Text in Illustration:
*a
Component without harness connected
(Headlight Leveling Switch)

  1. E066582E01
    Inspect operation of the headlight leveling light.

    1. Connect the battery's positive (+) lead to terminal 3 and negative (-) lead to terminal 6, then check that the LED illuminates.

      OK:
      LED illuminates.

      If the result is not as specified, replace the headlight leveling switch assembly.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →