INSTALLATION
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL MAP LIGHT BULB |
Install the 2 map light bulbs to the map light assembly.
| 2. INSTALL NO. 1 MAP LIGHT LENS |
Attach the claw to install No. 1 map light lens.
| 3. INSTALL NO. 2 MAP LIGHT LENS |
- HINT:
- Use the same procedure described for the No. 1 map light lens.
| 4. INSTALL MAP LIGHT ASSEMBLY |
Connect the connector.
Attach the 2 guides and claw.
Install the 2 screws to install the map light assembly.
