REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1.
REMOVE MAP LIGHT ASSEMBLY |
 |
- Remove the 2 screws.
Detach the claw and 2 guides and remove the map light assembly.
Disconnect the connector.
| 2.
REMOVE NO. 1 MAP LIGHT LENS |
 |
- Using a screwdriver wrapped with protective tape, detach the claw and remove the No. 1 map light lens.
- HINT:
- Protective tape the screwdriver tip before use.
Text in Illustration
*1
|
Protective Tape
|
| 3.
REMOVE NO. 2 MAP LIGHT LENS |
 |
- HINT:
- Use the same procedure described for the No. 1 map light lens.
| 4.
REMOVE MAP LIGHT BULB |
 |
Remove the 2 map light bulbs from the map light assembly.