2014 Hilux · Service Manual ENGINE

17 (1) Interior IC Malfunction

Diagnostic trouble codes · Vehicles built Jun 2011 – Oct 2011

Versions by build date: Jun 2011 – Oct 2011 Nov 2011 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
17 (1)
ECU malfunction
ECM

INSPECTION PROCEDURE

HINT:
Read freeze frame data using intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was running or stopped, whether the engine was warmed up or not, whether the air-fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.


1. CHECK DTC OUTPUT (INTERIOR IC DTC IS OUTPUT AGAIN)
  1. Clear the DTC (Click here).

  1. Turn the ignition switch ON.

  1. Check the DTC (Click here).

    Result:
    Display (DTC output)
    Proceed to
    DTC 17 (1) is output again
    A
    No DTC output
    B



B
CHECK FOR INTERMITTENT PROBLEMS
A

REPLACE ECM


← 15 (4) Throttle Motor Circuit Malfunction (from Jun 2011)17 (1) Interior IC Malfunction (Nov 2011 – Jul 2013) →