INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT MAGNETIC CLUTCH CLEARANCE |
Place the viscous with magnet clutch heater in vise.

Set the dial indicator to the magnet clutch hub.
Connect the battery positive (+) lead to the terminal 1 of magnet clutch connector and the (-) lead to the ground wire. Turn on and off the magnet clutch and measure the clearance.
- Standard clearance:
- 0.35 to 0.60 mm ( 0.33 to 0.023 in.)
- NOTICE:
- Adjustment shall be performed with 3 or less magnet clutch washers.
