REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
| 2. REMOVE FAN & GENERATOR V BELT |
| 3. DISCONNECT WATER BY-PASS HOSE |
Using pliers, grip the claws of clip and side the clip and disconnect the water by-pass hose.

| 4. DISCONNECT HEATER WATER OUTLET HOSE |
- HINT:
- Use the same procedures for the water by-pass hose.
| 5. REMOVE VISCOUS WITH MAGNET CLUTCH ASSEMBLY |
Disconnect the connector.

Remove the 2 bolts and viscous with magnet clutch heater assembly.
