ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT HEADLIGHT RELAY (Marking: H-LP) |
![]() ![]() |
Remove the engine room relay block cover.
Remove the headlight relay from the engine room relay block.
Inspect the headlight relay resistance.
- Standard resistance:
Terminal Connection
Specified Condition
3 - 5
10 kΩor higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Install the headlight relay to the engine room relay block.
Install the engine room relay block cover.


