ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2011
| CHECK INTEGRATION RELAY (FOG RELAY) |
![]() ![]() |
| *a |
Claw |
Using a screwdriver, detach the 2 claws, and disconnect the integration relay from the engine room junction block.
- HINT:
- Tape the screwdriver tip before use.
Measure the voltage of the FOG relay.

Text in Illustration *1
Engine Room Junction Block
- Standard voltage:
Tester Connection
Switch Condition
Specified Condition
1I-4-Body ground
Fog light switch ON and headlight dimmer switch set to TAIL or HEAD
10 to 14 V

