INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT REAR WINDOW DEFOGGER SWITCH ASSEMBLY |
![]() ![]() |
Check the illumination area of the switch.
- Standard measurement:
Measurement Condition
Specified Condition
Battery positive (+) → 1 (ILL+)
Battery negative (-) → 2 (ILL+)
Illuminates
- HINT:
- The ON/OFF indicator of the switch will not illuminate.
Text in Illustration *a
Component without harness connected
(Rear Window Defogger Switch Assembly)
Check ON/OFF indicator of the switch.

Push the switch several times. Check that the ON/OFF indicator illuminates or turns off according to switch operation.
- Standard measurement:
Measurement Condition
Specified Condition
Specified Condition
Battery positive (+) → 5 (IG)
Battery negative (-) → 3 (E)
Defogger switch ON
Illuminates
- HINT:
- The illumination area of the switch will not illuminate.
Text in Illustration *a
Component without harness connected
(Rear Window Defogger Switch Assembly)
Measure the resistance of the switch.

- Standard resistance:
Measurement Condition
Specified Condition
Specified Condition
4 (D) - 3 (E)
ON
Below 1 Ω
4 (D) - 3 (E)
OFF
10 kΩ or higher
Text in Illustration *a
Component without harness connected
(Rear Window Defogger Switch Assembly)

