2014 Hilux · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE NO. 1 SWITCH HOLE BASE

B278246E01
  1. Put protective tape around the No. 1 switch hole base.

    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 5 claws.

  1. Disconnect the connectors and remove the No. 1 switch hole base.


2. REMOVE REAR WINDOW DEFOGGER SWITCH ASSEMBLY

  1. B278400
    Detach the 2 claws and remove the rear window defogger switch assembly.

← COMPONENTS (from Jun 2011)INSPECTION (from Jun 2011) →