62-46 Scratched / Reversed Disc
Diagnostic trouble codes · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013
DESCRIPTION
| DTC Code |
DTC Detection Condition |
Trouble Area |
| 62-46 |
Scratches or dirt is found on the disc surface or the disc is inserted upside down. |
|
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
| 1. CHECK THAT DISC IS INSERTED PROPERLY |
Check whether or not the disc is inserted upside down.
- OK:
- The disc is properly inserted.
|
|
||||
| OK | |
| 2. CHECK DISC |
Check that the disc is not deformed or cracked.

- OK:
- No deformation or cracks in the disc.
|
|
||||
| OK | |
| 3. DISC CLEANING |
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

- NOTICE:
- Do not use a conventional record cleaner or antistatic preservative.
| NEXT | |
| 4. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
| 5. REINSERT DISC PROPERLY |
Replace the disc with a normal one.
Clear the DTCs (Click here).
Check for DTCs and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
