2014 Hilux · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE NO. 1 SWITCH HOLE BASE

B278246E01
  1. Put protective tape around the No. 1 switch hole base.

    Text in Illustration 
    *1
    Protective Tape

  1. Using a moulding remover, detach the 5 claws.

  1. Disconnect the connectors and remove the No. 1 switch hole base.


2. REMOVE LIGHT CONTROL RHEOSTAT KNOB

B277575
  1. Detach the claw and remove the light control rheostat knob.


3. REMOVE LIGHT CONTROL RHEOSTAT

B277576
  1. Remove the nut and light control rheostat.

← COMPONENTS (from Jun 2011)REMOVAL (Aug 2012 – Jul 2013) →