INSTALLATION
Removal / installation · Vehicles built from Jun 2011
| 1. INSTALL VACUUM SWITCHING VALVE (for EGR Bypass Valve) |
Install the vacuum switching valve to the manifold stay with the screw.
- Torque:
- 3.5 N*m{ 36 kgf*cm , 31 in.*lbf }
| 2. INSTALL MANIFOLD STAY WITH VACUUM SWITCHING VALVE |
Install the manifold stay with vacuum switching valve with the 2 bolts.
- Torque:
- 19 N*m{ 194 kgf*cm , 14 ft.*lbf }
Connect the connector and 2 No. 2 vacuum transmitting hoses and attach the 2 clamps as shown in the illustration.

Text in Illustration *1
No. 2 Vacuum Transmitting Hose
*2
White Paint Mark
